Aztech ADSL2+ Ethernet Router Guia do Utilizador Página 1

Web Interface User’s Guide ADSL Ethernet & USB Combo Router

4.4 Configuring the WAN Before the gateway will pass any data between the LAN interface(s) and the WAN interface, the WAN side of the modem must be c

Figure 4 (Bridge Connection Setup) To complete the connection you must now click the apply button. The apply button will temporarily save this

Following is a description of the different options: a. Username: The username for the PPPoA access; this is provided by your DSL service provider or

4.4.1.3 PPPoE Connection Setup PPPoE is also known as RFC 2516. It is a method of encapsulating PPP packets over Ethernet. PPP or Point-to-Point prot

Figure 6 (PPPOE Connection Setup) To complete the connection you must now click the apply button. The apply button will temporarily save this conn

Figure 7 (DHCP Connection Setup) To complete the connection you must now click the apply button. The apply button will temporarily save this connec

Figure 8 (Static IP Connection Setup) To complete the connection you must now click the apply button. The apply button will temporarily save th

Figure 9 (CLIP Connection Setup) To complete the connection you must now click the apply button. The apply button will temporarily save this c

4.5 Configuring the LAN By default, your ADSL Router has DHCP server (LAN side) enabled. If you already have a DHCP server running on your network,

Figure 10 (DHCP Server configuration) In addition to the DHCP server feature, the ADSL Router supports the DHCP relay function. When the ADSL Router

1. Introduction ... 3 1.1 F

By turning off the DHCP server and relay the network administrator must carefully configure the IP address, Subnet Mask and DNS settings of every com

Figure 12 (Management IP address) The apply button will temporarily save this connection. To make the change permanent you need to click on Save Set

4.6.1 UPnP UPnP NAT and Firewall Traversal allow traffic to pass-thru the ADSL Router for applications using the UPnP protocol. This feature requires

4.6.2 Port Forwarding Using the Port Forwarding page, you can provide local services (for example web hosting) for people on the Internet or play Inte

4.6.3 Advanced Security In the presence of the firewall, anonymous Internet traffic is blocked. Using the advanced security features, you can redirect

4.6.3.2 Enable Web from WAN Enabling the Web from WAN on your local network allows Web requests that come from the Internet to be re-routed to a Web

4.6.6 MAC Address Filters The MAC filtering mechanism provides a way for the users to define rules to allow/deny frames through the bridge based on so

Note: The MAC filter table contains 3 hidden rules. These rules are entered automatically by the system to ensure the user does not "lock" t

The apply button will temporarily save this connection. To make the change permanent you need to click on Save Settings (at the side of the page). At

4.6.9 Dynamic Routing Dynamic Routing allows the ADSL Router to automatically adjust to physical changes in the network. The ADSL Router, using the RI

1. Introduction The ADSL Ethernet & USB Combo Router is the perfect high-speed WAN bridge/router. This full-featured product is specifically desi

4.7 Tools The ADSL Router supports a host of tools that will allow you to customize and debug your ADSL Router. 4.7.1 System Commands To make the cha

Figure 19 (Update Firmware) 4.7.4 Ping Test Once you have your ADSL Router configured, it is a good idea to make sure you can ping the network. You

Figure 20 (Ping test) 4.7.5 Modem Test The Modem Test is used to check whether your ADSL Router is properly connected to the WAN Network. This test

4.8.3 DHCP Clients Select to view the list of DHCP clients. 4.8.4 Modem Status Select to view the Status and Statistics of your broadband (DSL) conn

5. Appendix A: Troubleshooting Below is a list of commonly asked questions. Before calling technical support, please look through these issues to se

5.3 The DSL Link LED continues to blink but does not go solid 1. This means that the DSL line is trying to train but for some reason it cannot estab

6. ADSL Router terms What is a firewall? A firewall is protection between the Internet and your local network. It acts similarly to the firewall in y

Management Support • Web Based HTTP management GUI • TFTP/FTP Support for Firmware Upgrade • Web Based Firmware Upgrade (Local) • Soft Factory Res

2. Your gateway at a glance The ADSL Ethernet & USB Combo may have different ports and LEDs. Let’s take a look at the different options. Depend

3. Installing your ADSL Router 1. Locate an optimum location for the ADSL Router. 2. For connections to the Ethernet and DSL interfaces, please refe

4. Setting up your ADSL Router This section will guide you through your ADSL Router’s configuration. The ADSL Router is shipped with a standard PPP c

4.2 Quick Start The first screen (Figure 2) that appears (after the log in screen) is the Quick Start screen. By default the ADSL Router has being c

4.3 Setup (for advance user) From this screen the user can setup the ADSL Router (configure the LAN and WAN connection(s), configure the advanced con